Model
Name
Check Valve
SF-2500
Full BoreCLASS 2500
2" ~8" DN50~DN200
Product Picture
FeaturesThree Pieces Sanitary Ball Valves |
|---|
1. API600 SF-2500 |
Notifications| Dimensions |
| Please refer to the Dimensions section. |
 |
| Measurement Units |
| 1. All lengths are measured in millimeter and inch. 2. All weights are measured in kilograms and pounds |
| About Product |
| 1. Shipping and Tax are not included in pricing. 2. All products supplied by Modentic are under products liability insurance. 3. Valvebus.com reserves the rights to change any details without prior notice. |
| About VALVEBUS |
| VALVEBUS.com reserves the right to change any details without prior notice. |
| Back to Top |
 |
Specifications| MODEL | SF-2500 |
| PRODUCT TYPE | Three Pieces Sanitary Ball Valves |
| OPERATION | Swing Type |
| PRESSURE | CLASS 2500 |
| CONNECTION | Flanged End |
| PORT | Full Bore |
| BODY Material | ASTM A216 Gr.WCB |
| CAP / BONNET Material | ASTM A216 Gr.WCB |
| DISC Material | ASTM A216 Gr.WCB |
| SEAT Material | - |
| SEAT RING Material | ASTM A105 |
| BODY SEAL Material | Ring Joint-Soft Iron |
| API600 SF-2500 |
| STANDARD COMPLIANCE • API 600 • BS1868 Class 2500 • ASME/ANSI B16.34 • ASME/ANSI B16.10 Class 2500 RF • ASME/ANSI B16.10 Class 2500 BW • ASME/ANSI B16.5 Class 2500 • Finish 125-250 AARH • ASME/ANSI B16.25 • API 598 OPTIONS • Other materials also available on request |
| SAMPLE CASTINGS |
| Before castings are released for production, the Modentic NDE inspector Level III, evaluates and approves the submitted x-ray films (100% Coverage) as per ASME B16.34 acceptance standard. Improves the intermal integrity of castings (RT Level 2 or better) at pattern approval |
| SWING TYPE |
| In the open position of a swing type check valve, the flow of fluid forces the hinged disk up and allows free flow through the valve. Flow in the opposite direction with the aid of gravity, forces the hinged disk to close the passage and blocks the flow. |
| Flanged End |
| END CONNECTION STANDARD ANSI B16.5 / EN1092 VALVES LENGTH STANDARD ANSI B16.10 / DIN3202 F1 / F4 / F5 |
Dimension + Weight| SIZE NPS |
E mm |
H mm |
L mm |
WEIGHT kgs |
| DN50 | - | 350.0 | 451.0 | - |
| DN65 | - | 380.0 | 508.0 | - |
| DN80 | - | 423.0 | 578.0 | - |
| DN100 | - | 465.0 | 673.0 | - |
| DN150 | - | 515.0 | 914.0 | - |
| DN200 | - | 580.0 | 1022.0 | - |
| SIZE Inch |
E Inch |
H Inch |
L Inch |
WEIGHT lbs |
| 2" | - | 13.8 | 17.8 | - |
| 2-1/2" | - | 15.0 | 20.0 | - |
| 3" | - | 16.7 | 22.8 | - |
| 4" | - | 18.3 | 26.5 | - |
| 6" | - | 20.3 | 36.0 | - |
| 8" | - | 22.8 | 40.2 | - |
